- Full scale flow rates from 2 ml/min up to 40ml/min (H₂O and IPA)
- Interface, connector: I²C (6-pin Molex)
- Compact and lightweight design at the best cost-benefit ratio
6
Products
Sites & Languages
Liquid flow
Characteristics
Calibrated sensors for measuring small and smallest flow rates with maximum safety, stability and reliability.
Benefits
The sensors set new standards for monitoring low flow rates. This benefits applications in medicine and diagnostics as well as in process and automation technology.
Technology
Sensors based on patented CMOSens® Technology enable fluids to be measured through the walls of the flow channel in milliliters to nanoliters per minute.
CMOSens® TechnologyFeatured products
- Full scale flow rate: 40 ml/min (H₂O)
- Interface options, connector: RS485, I²C, USB/analog (4-pin M8)
- Millisecond fast response time
- Full scale flow rate: 120 ml/min (H₂O and IPA)
- Interface options, connector: RS485, I²C, USB/analog (4-pin M8)
- PFA tubes for fluidic connection
- Full scale flow rate: 120 ml/min (IPA)
- Interface options, connector: RS485, I²C, USB/analog (4-pin M8)
- For hydrocarbon based liquids only
- Full scale flow rates from 80 µl/min up to 5000 µl/min (H₂O)
- Interface options, connector: RS485, I²C, USB/analog (4-pin M8)
- Excellent chemical resistance
3
Products
- Full scale flow rates from 1.5 µl/min up to 8 µl/min (H₂O)
- Interface options, connector: RS485, I²C, USB/analog (4-pin M8)
- Max. operating pressure: up to 1200 bar (17500 psi)
3
Products
- Converts the I²C interface to the output interface needed
- Interface options: USB, RS485, current output, voltage output
- Full variability for easiest system integration
4
Products
- Full scale flow rate: 40 ml/min (H₂O)
- Interface options, connector: I²C (4-pin Molex)
- Millisecond fast response time
- Full scale flow rate: 1 ml/min (H₂O)
- Interface I²C (contact pads)
- Planar microfluidic glass chip of only 10 x 10 mm²
- Full scale flow rate: 5 ml/min (H₂O); 80 ml/min (IPA)
- Interface options, connector: I²C (5-pin Molex)
- 6 sensor versions cover different flow ranges down to nl/min
12
Products
- Switch points (calibration medium): 0.25 or 4.5 ml/min (H₂O)
- Interface options, connector: 5V/0V high/low output (5 pin Molex)
- Flow switch for flow and bubble detection
2
Products
- Full scale flow rate: 20 ml/h up to 1000 ml/h (H₂O)
- Interface: I²C (contact pads)
- Single-use design for biomedical applications
2
Products